SHCL,Committed to becoming the global water treatment chemicals expert and leader!中文 | English
They are all searching: 聚丙烯酰胺  絮凝剂
Contact information
Shun Hua Changli environmental protection new material Co Ltd
Mr. Liu:18112711779
Miss Xu:18932695977
Sales address: Suzhou Fenghua Plaza No. 289 Wuzhong District Mudu town Jinfeng Road 1-1109, room 1110
Anionic polyacrylamideCurrent location: 主页 > English > Products > pam > Anionic polyacrylamide >

Emulsion type anionic polyacrylamide

Product Description:
SHCL-LM series anionic polyacrylamide is soluble in water, hardly soluble in organic solvent, and has a characteristic of high polyelectrolyte in neutral medium and alkaline medium, which may speed up the settlement of particles in suspension liquid and has the effect of speeding up solution clarification very obviously and improving filtering. 

Technical parameters:
Field of use:
1. Flocculant is mainly used in the treatment of industrial waste, solid-liquid separation in chemical production, mineral coal washing wastewater treatment, and source water clarification treatment of waterworks, acting as a coagulant aid; the equipments mainly used are sedimentation tank, efficient coagulation pool, and some sludge dewatering equipments.
2. It is used in tertiary oil recovery, increasing oil displacement efficiency, enhancing oil recovery ratio; it may also be used as a thickener, stabilizer and flocculant of drilling fluid.
3. It may be used as a retention and drainage aid, reinforcing agent, and dispersing agent; meanwhile, it may be used in the treatment of paper making source water and waste water.
Packaging :
Emulsion: loaded with 25KG and 50KG plastic barrel   loaded with 200KG and 1000KG plastic barrel;
Dissolution of polyacrylamide:
Dissolved water: Low hardness of water with PH as neutral is recommended to use; groundwater and water dissolving inorganic substance or excessive metal ions is easy to reduce product performance. 
Dissolution time: the dry powder products can play their best performance when used after dissolved for one hour (non-ionic dry powder products are recommended to dissolve for more than two hours). 
Dissolution concentration: the general dissolution concentration of cationic products is 0.2% (feasible for 0.1%~0.5%); the dissolution concentration of anionic and non-ionic products is 0.1% (feasible for 0.05%~0.3%). 
Dissolution should be conducted in the grooves made of materials of plastic, ceramic and stainless steel, for which the stirring speed should not be too fast. The centrifugal pump and other high-shear rotor pump should be avoided during conveying of dilute solution, and it is best to use screw pump and other low-shear pump. 
The dissolution conditions are relatively special for flocculants used in aluminum oxide technology, and on-site technical guidance is required. 
Notes for use and storage of polyacrylamide:
This product is non-toxic, water soluble and easy to be affected with damp and form masses. 
Water is used to clean hands when hands or skin is contaminated. 
The product storage temperature is 5℃~30℃ and is recommended to keep in dry places. 
The dry powder products with original packaging is recommended to use within one year, with shelf life of two years. 
The storage time of general emulsion is six months. If stored for a longer time, one layer of oil will be precipitated from the emulsion superstratum, which is normal phenomenon. Stir uniformly before use so that the use effect will not be affected. 
The dilute solution prepared should not be kept for a long time, and it is best to dissolve upon use. The product viscosity will reduce after more than 24 hours, causing the decrease in use.