SHCL,Committed to becoming the global water treatment chemicals expert and leader!中文 | English
They are all searching: 聚丙烯酰胺  絮凝剂
Contact information
Shun Hua Changli environmental protection new material Co Ltd
Mr. Liu:18112711779
Miss Xu:18932695977
Sales address: Suzhou Fenghua Plaza No. 289 Wuzhong District Mudu town Jinfeng Road 1-1109, room 1110
Anionic polyacrylamideCurrent location: 主页 > English > Products > pam > Anionic polyacrylamide >

Dry powder type solid anion polyacrylamide

HCL-M, LM series of anion and anion polyacrylamide soluble in water, insoluble in organic solvent, polymer electrolyte is characterized in neutral and alkaline medium, can accelerate the settlement of particles in suspension, to speed up the solution to clarify, improve the filtering effect.

Technical parameters:

Use domain:
1, mainly used for industrial wastewater treatment, solid-liquid separation, chemical production, processing of ore washing waste water, tap water plant source clarification, main coagulant function, the main use of the equipment such as sedimentation tank, high coagulation chamber, sludge dewatering equipment etc..
2, for the three oil recovery, increase oil displacement capacity, improve oil recovery, but also can be used for drilling mud thickening agent, stabilizer, flocculant, etc..
3, can be used as retention agent, reinforcing agent and dispersing agent in the papermaking process; at the same time can be used for papermaking raw water and sewage treatment.

25KG paper bag (lined with plastic bag) 750KG large bag (woven bag)

Dissolution of polyacrylamide:
Dissolved water: it is recommended to use PH as a neutral low hardness water, the use of groundwater, dissolved inorganic or metal ions too much water to reduce product performance.
Dissolution time: 1 hours after the dissolution of dry powder products can be used to play the best performance (recommended non ionic powder products to dissolve more than 2 hours).
Solution concentration: the usual solution concentration of the cationic product is 0.2% (0.1%~0.5%); the solution concentration of the anionic and non ionic products is 0.1% (0..05%~0.3%).
Dissolve the operation should be in the plastic, ceramic, stainless steel and other materials in the groove, mixing speed should not be too large. Dilute solution to avoid the use of centrifugal pumps and other high shear rotor pump, the best use of the screw pump, such as low shear pump.
The use of aluminum chloride process, the dissolution of the conditions are special, the need for on-site technical guidance.
Use and preservation of polyacrylamide note:
This product is non-toxic, easy to dissolve in water, damp easily agglomerate.

Dip hand or skin, rinse with water.
This product storage temperature of 5 degrees C ~30 C, it is recommended to save in a dry place.
Suggested that the original packaging of dry powder products within a year to use the shelf life of two years.
The storage time of the general emulsion is 6 months. Storage time is longer, the emulsion layer will have a layer of oil precipitation, which is a normal phenomenon. When the use should first stir evenly, will not affect its use effect.
Formulated dilute solution should not be stored for a long time, it is best to use with the dissolution of. More than 24 hours after the decline in product viscosity caused by the use of the effect of decline.